Page 1 of 1

Wanted Rod Change gearbox

Unread postPosted: Wed Feb 15, 2017 8:18 pm
by ballybob
Hi all. I'm completing a rebuild of my sons Clubman and today I finished pulling down the gearbox. To my horror the third motion to first motion bearing was missing, The fourth gear synchro was worn away and broken in two (due to missing bearing) and the 1st gear dogs smashed and broken.

So i'm after a replacement rod change gearbox or just the internals. Don't need a diff either.

I will consider anything as I intend to overhaul it.

Thanks for looking
Rob

Re: Wanted Rod Change gearbox

Unread postPosted: Thu Feb 16, 2017 8:06 pm
by 2lateagain
Have sent you a PM

Graham

Re: Wanted Rod Change gearbox

Unread postPosted: Thu Feb 16, 2017 8:29 pm
by ballybob
2lateagain wrote:Have sent you a PM

Graham


Sorry Graham didn't get your message but I sent you one.

Rob

Re: Wanted Rod Change gearbox

Unread postPosted: Fri Feb 17, 2017 6:52 am
by 2lateagain
Bob, have left message on your phone and also have resent the message, not real good at this computer stuff.

Graham

Re: Wanted Rod Change gearbox

Unread postPosted: Sat Feb 18, 2017 10:18 am
by turbo_squarenose
PM sent

Re: Wanted Rod Change gearbox

Unread postPosted: Wed Feb 22, 2017 8:27 pm
by ballybob
Thanks for everyones offers. I got hold of a complete engine and gearbox setup in Sydney. I have some spares if anyone needs a 1100 motor and head. Also a rod change gearbox casing (no gears).

Rob