Dash Settings

The Dash Settings window is separate from the main Nissan DataScan I Dash application. It's only used to change the main settings for the software. It does not need to be opened to start the Dash application.

Visible Cursor - turns On and Off mouse pointer.

Message - message to be displayed at the bottom of each gauge screens.

Screen A

Screen A contains 2 modern design gauges and 2 historical graphs. The graphs represent the gauge selected parameter values over last 3 minutes. Readings above the warning value are represented with yellow graph line.

Screen B

Screen B contains 2 classic design gauges and 2 historical graphs. The graphs represent the gauge selected parameter values over last 3 minutes. Readings above the warning value are represented with yellow graph line.

Screen C

Screen C contains 4 modern design gauges. The gauge parameter selection on this screen is independent to any other screen.

Screen D

Screen D contains 4 classic design gauges. The gauge parameter selection on this screen is independent to any other screen.

Screen E

Screen E contains 6 modern design gauges. The gauge parameter selection on this screen is independent to any other screen.

Screen F

Screen F contains 6 classic design gauges. The gauge parameter selection on this screen is independent to any other screen.

Each gauge parameter can be changed by clicking on the gauge itself. The software will wait for 5 seconds after parameter change and then automatically re-establish communication with the ECU. If a message “Selected parameter not supported by the ECU” is displayed at the bottom of the screen please select different parameter.

Screens can be changed by clicking on the buttons at the top of the screen or by using A,B,C,D,E or F keyboard keys.

The application can be closed by clicking on the Exit button at the bottom of the screen or pressing the Esc key.