Discussions related to Nissan DataScan II software (NDSII) for Android
-
burnout1_ph
- Posts: 7
- Joined: 03 Mar 2017, 18:40
Post
by burnout1_ph » 03 Mar 2017, 18:44
Hello,
Just recently bought a Nissan DataScan II for Android, the software is absolutely fantastic, using it for real time diagnostic for my 2004 Nissan Sentra 1.8. My question is, does the Nissan DataScan have a way to do a TPS Relearn on any of their products that will work with my current vehicle.
Thank you and more power.

-
Tom
- Site Admin
- Posts: 560
- Joined: 09 Dec 2011, 19:17
Post
by Tom » 06 Mar 2017, 17:32
TPS relearn is done by the ECU automatically. It doesn't need to be initiated by any external software.
-
burnout1_ph
- Posts: 7
- Joined: 03 Mar 2017, 18:40
Post
by burnout1_ph » 06 Mar 2017, 20:28
Thanks for the response Tom, I always had issues with the TPS once I removed the throttle body, disassemble everything, cleaned it, and assembled it back, once i start the engine; idle is erratic jumping from 900 rpm to 1500 rpm, I tried resetting the ECU by unplugging the negative battery but that did not work. The only way to fix this is to bring it to the dealer and have this relearn via Consult. Hoping NissanDataScan would have a simpler way of doing this.
Currently using a Gen 1 QG18DE (wired throttle body).
Thanks.
Alfred
-
Tom
- Site Admin
- Posts: 560
- Joined: 09 Dec 2011, 19:17
Post
by Tom » 14 Mar 2017, 15:30
Try the Idle Air Volume Learn (IAVL) function. When completed successfully this usually fixes the high idle RPM issue.