• Analysis of fat, proteins, lactose and dry matter in different kind of milk
• New and user-friendly interactive menu for analysis and calibrations
• Simple calibration procedure, by keyboard or by PC, for 3 different kinds of samples
• Results in about 90 seconds, without he need of the operator's presence
• Preparation, homogenisation and heating of samples are unnecessary
• No need of consumables or chemicals
• Aspiration of the sample from every kind of container by means of a precision pump
• Extendable sampling hose, up to 70 cm total length
• Separation of the inlet channel from the outlet one: total absence of carry-over  

• Measurement ranges and accuracy:
  - Fat: from 0,01% to 20,00% ± 0,10%         - Lactose: from 0,01% to 6,00% ± 0,20%
  - Proteins: from 2,00% to 7,00% ± 0,15%  - Dry matter: from 3,00% to 15,00% ± 0,15%
• Sample volume: 25 ml
• Working conditions: temperature from 10° to 35°C, humidity from 30% to 80%
• RS232 port for PC and printer port (the printer is sold separately)
• Power supply: 220 V and, upon request, 12/24 V with car/truck plug
• Dimensions: 230 x 230 x 205 (h) cm
• Weight: 4,5 Kg.
• Consumption: 50 W

NUCLEOUCOUNTER® SCC-100 is based on fluorescencemicroscopy and on the use of special,very practical, disposable cassettes, which dose the milk sample and put it in contact with the built-in, pre-dosed reagents; these cassettes work as calibrated reading cells. After placing the cassette inside the equipment and pressing one key only, the result appears on the display and it is printed within few seconds. The analysis is completed in just 3 simple and fast steps: introduction of the sample in the cassette, positioning of the cassette into the instrument and pressure on the “RUN” key.

Advantages

• Full compliance to FIL-IDF 148 international regulation
• Excellent accuracy and repeatability levels on every kind of milk
• Immediate analysis, in less than 30 seconds
• No calibration is required. Neither during the installation, nor later on
• No maintenance or service is required
• No need to handle and dispose carcinogenic or toxic reagents
• Ready for tests just 5 seconds after switching on
• Compact, light and reliable system
• The operator's work is reduced to a minimum
• Suitable to every routine, even the smallest one
• Supplied with thermal printer and USB data exit
• Software SomaticView®(optional) for data handling and storing
• Portable version is available upon request   

• Sample volume: min 500 μl
• Analysis in less than 30 seconds
• Measurement range: 10.000 - 2.000.000. cells/ml
• Power consumption: less than 25 Watts
• Sizes and weight: 22 x 38 x 26 cm (w x d x h), without printer 3 Kg.